X-Tack
X-Tack
Extreme Bonding Without Support
Available in White, Grey & Black 290ml cartridges
Apply, position and forget with this instant grab adhesive. No messing around with clamps, screws or temporary structures. With Tec7 X-TACK you maintain control of all assemblies. The Tec7 Cleaner is the perfect partner for X-TACK. This safe solvent cleaner ensures a grease-free substrate to which perfect adhesion is possible.
X-Tack Features
- The fastest assembly adhesive of all MS polymers
- Super strong, structural bonding
- Vibration, impact and shock resistant
- 100% waterproof assembly and can be painted over with most lacquers and paints
- Odorless and solvent-free, so it can be used in confined spaces
- Perfect for vertical bonding
- Permanently elastic
- Does not sag up to a 40mm thick joint
- X-TACK replaces soldering, bolts, nuts, nails etc and save you time and money
X-Tack Uses
- Wall and facade covering: ACM, plaster, natural stone, brick, concrete, aluminum, glass, etc.
- Sign installation: ACM panels
- Ceiling panels: All thermal panels, synthetic panels, wood, PVC, PUR, etc.
- Window frames: Coated aluminium, solid wood, synthetic.
- Door frames and window sills: Natural or coated, natural stone, brick, concrete, aluminium, brass etc. Does not leak.
- Floor, wall tiles and plinths: Marble, granite, blue stone, porous materials and earthenware.
- Roofing elements: All roofing elements made from wood, steel or in combination with roof covering and lead sheets (excludes bitumen).
- Construction elements: All construction elements made from stainless steel, aluminium, metal, copper, etc.
Specifications
Additional information
| Brand | Tec7 |
|---|---|
| Color | Black, Grey, White |
| Basis | MS polymer |
| Specific weight | 1.49 g/cm³ |
| Viscosity | Hard paste |
| Shore hardness (DIN 53505) | After 3 weeks at 23°C/50% |
| Relative humidity | +/- 54 Shore A.Shrinkage (DIN 52451): approx. 5% |
| Density (DIN EN 27390) | Does not sag up to a 40 mm thick joint |
| Elongation at break | > 500% |
| Modulus at 100% elongation 23°C (DIN 53504 S2) | 1.0 N/mm² |
| Tensile strength (DIN 53504 S2) | 2.2 N/mm² |
| Skin formation | 3-5 minutes |
| Hardening time | 24h – 2.7mm |
| Temperature resistance | -40°C to +90°C |
| Processing temperature | From +5°C to +40°C |
| Chemical resistance | Good: water, salt water, aliphatic solvents, oils, greases, diluted organic acids and lyes. |
| Weather resistance | Perfect |
| Shelf life | 15 months in closed, original packaging |
Contact us
Have any questions? Please contact us with any of your interior supply enquiries.